Project Description

Intellinova Parallel MB

Intellinova Parallel MB is a small and robust unit for parallel condition measurement on four channels. The unit is available in two versions; either for vibration measurement – with optional shock pulse measurement via the DuoTech accelerometer – or for shock pulse measurement only.

High-performance characteristics and easy configuration

Intellinova Parallel MB measures in parallel on all four channels and provides immediate indication of current operating condition. The unit can operate in an online or an offline mode. A number of pre-programmed configurations are available for easy selection with rotary switches on the front panel.

Intellinova Parallel MB can operate as an offline device – where further analysis can be done using for example portable instruments on the unit’s isolated signal output – but is also easily integrated into existing industrial automation systems via Modbus RTU.Intellinova Parallel MB can operate as an offline device – where further analysis can be done using for example portable instruments on the unit’s isolated signal output – but is also easily integrated into existing industrial automation systems via Modbus RTU. Alarms can be set with or without a delay, based either on time or on a number of measurements. Measuring results and symptom values are compared with the alarm level set up and can activate one of six digital inputs/outputs which can be configured to control a relay, for example. To ensure that no critical events go unnoticed, the unit can be set up to repeat its configured measurements as often as possible.The status of the latest measurement is indicated by a LED on the front panel. Two parallel RPM inputs can be used for measurements with HD Order Tracking. The units have a robust aluminum housing and are intended for DIN rail mounting.

DOWNLOAD BROCHURE

Intellinova Parallel MB cabinet with HMI option simplifying measurement configuration and alarm management.

Intellinova Parallel MB with HMI display makes advanced measurement technology, including the patented HD technologies, accessible through a user-friendly and simple graphical interface. Without the need for database management and expertise, Intellinova Parallel MB with HMI is an “out-of-the-box” solution with ample customization possibilities, requiring minimal user training. Suitable measurement configurations for condition monitoring of typical machine combinations – such as motor-pump or fan-motor – are pre-programmed for ease of use.

The HMI display manages eight applications and up to twelve Intellinova Parallel MB units with four channels each, allowing a fully customizable solution to meet different needs. The display can be installed in the same cabinet as the measuring units, or in other suitable locations if required. To supplement existing Intellinova Parallel MB installations, it is also possible to purchase the HMI display separately.

DOWNLOAD BROCHURE

Vibration measurement unit – Dual Technology

The unit measures the vibration level on all four channels in parallel. When used with the DuoTech (Dual Technology) accelerometer, it can also be used for shock pulse measurement. The unit provides continuous monitoring of operating condition by means of:

  • Vibration measurement (Acceleration / Velocity / Displacement rms, HD Enveloping)
  • Symptom values
  • Spectrum
  • Time signal
  • Shock pulse measurement including lubrication condition (HDm/HDc, LR/HR, dBm/dBc) via DuoTech accelerometer

Shock pulse measurement unit

The measuring unit measures on four channels in parallel, monitoring operating condition by means of:

  • Shock pulse measurement including lubrication condition (HDm HDc, LR/HR, dBm/dBc)
  • Symptom values
  • Spectrum
  • Time signal